Class NonshareableCountingBufferedDataInputStream
- All Implemented Interfaces:
Closeable
,DataInput
,AutoCloseable
- Author:
- Andrew Pavlin, KA2DDO
-
Field Summary
Fields inherited from class java.io.FilterInputStream
in
-
Constructor Summary
ConstructorDescriptionCreates aNonshareableCountingBufferedDataInputStream
and saves its argument, the input streamin
, for later use.NonshareableCountingBufferedDataInputStream
(InputStream in, byte[] buf) Creates a new buffered output stream to write data to the specified underlying output stream with the specified buffer.NonshareableCountingBufferedDataInputStream
(InputStream in, int size) Creates aNonshareableCountingBufferedDataInputStream
with the specified buffer size, and saves its argument, the input streamin
, for later use. -
Method Summary
Modifier and TypeMethodDescriptionint
Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream.void
close()
Closes this input stream and releases any system resources associated with the stream.long
Get the number of bytes read (or skipped) by this stream.void
mark
(int readlimit) See the general contract of themark
method ofInputStream
.boolean
Tests if this input stream supports themark
andreset
methods.int
read()
See the general contract of theread
method ofInputStream
.final int
read
(byte[] b) Reads some number of bytes from the contained input stream and stores them into the buffer arrayb
.int
read
(byte[] b, int off, int len) Reads bytes from this byte-input stream into the specified byte array, starting at the given offset.final boolean
See the general contract of thereadBoolean
method ofDataInput
.final byte
readByte()
See the general contract of thereadByte
method ofDataInput
.final char
readChar()
See the general contract of thereadChar
method ofDataInput
.final double
See the general contract of thereadDouble
method ofDataInput
.final float
See the general contract of thereadFloat
method ofDataInput
.final void
readFully
(byte[] b) See the general contract of thereadFully
method ofDataInput
.final void
readFully
(byte[] b, int off, int len) See the general contract of thereadFully
method ofDataInput
.final int
readInt()
See the general contract of thereadInt
method ofDataInput
.final String
readLine()
See the general contract of thereadLine
method ofDataInput
.final long
readLong()
See the general contract of thereadLong
method ofDataInput
.final short
See the general contract of thereadShort
method ofDataInput
.final int
See the general contract of thereadUnsignedByte
method ofDataInput
.final int
See the general contract of thereadUnsignedShort
method ofDataInput
.final String
readUTF()
See the general contract of thereadUTF
method ofDataInput
.void
reset()
See the general contract of thereset
method ofInputStream
.long
skip
(long n) See the general contract of theskip
method ofInputStream
.final int
skipBytes
(int n) See the general contract of theskipBytes
method ofDataInput
.Methods inherited from class java.io.InputStream
nullInputStream, readAllBytes, readNBytes, readNBytes, skipNBytes, transferTo
-
Constructor Details
-
NonshareableCountingBufferedDataInputStream
Creates aNonshareableCountingBufferedDataInputStream
and saves its argument, the input streamin
, for later use. An internal buffer array is created and stored inbuf
.- Parameters:
in
- the underlying input stream.- Throws:
IOException
- if underlying stream cannot be read immediately
-
NonshareableCountingBufferedDataInputStream
public NonshareableCountingBufferedDataInputStream(InputStream in, int size) throws IllegalArgumentException, IOException Creates aNonshareableCountingBufferedDataInputStream
with the specified buffer size, and saves its argument, the input streamin
, for later use. An internal buffer array of lengthsize
is created and stored inbuf
.- Parameters:
in
- the underlying input stream.size
- the buffer size (minimum size 8 bytes).- Throws:
IllegalArgumentException
- if size < 8.IOException
- if underlying stream cannot be read immediately
-
NonshareableCountingBufferedDataInputStream
public NonshareableCountingBufferedDataInputStream(InputStream in, byte[] buf) throws IllegalArgumentException, IOException Creates a new buffered output stream to write data to the specified underlying output stream with the specified buffer. Note this constructor can only be used with underlying streams that are ready to be read at this time of this constructor call.- Parameters:
in
- the underlying input stream.buf
- the buffer to use (minimum size 8 bytes)- Throws:
IllegalArgumentException
- if size < 8.IOException
- if underlying stream cannot be read immediately
-
-
Method Details
-
read
See the general contract of theread
method ofInputStream
.- Overrides:
read
in classFilterInputStream
- Returns:
- the next byte of data, or
-1
if the end of the stream is reached. - Throws:
IOException
- if this input stream has been closed by invoking itsclose()
method, or an I/O error occurs.
-
read
Reads bytes from this byte-input stream into the specified byte array, starting at the given offset.This method implements the general contract of the corresponding
method of theread
class. As an additional convenience, it attempts to read as many bytes as possible by repeatedly invoking theInputStream
read
method of the underlying stream. This iteratedread
continues until one of the following conditions becomes true:- The specified number of bytes have been read,
- The
read
method of the underlying stream returns-1
, indicating end-of-file, or - The
available
method of the underlying stream returns zero, indicating that further input requests would block.
read
on the underlying stream returns-1
to indicate end-of-file then this method returns-1
. Otherwise this method returns the number of bytes actually read.Subclasses of this class are encouraged, but not required, to attempt to read as many bytes as possible in the same fashion.
- Overrides:
read
in classFilterInputStream
- Parameters:
b
- destination buffer.off
- offset at which to start storing bytes.len
- maximum number of bytes to read.- Returns:
- the number of bytes read, or
-1
if the end of the stream has been reached. - Throws:
IOException
- if this input stream has been closed by invoking itsclose()
method, or an I/O error occurs.
-
skip
See the general contract of theskip
method ofInputStream
.- Overrides:
skip
in classFilterInputStream
- Throws:
IOException
- if the stream does not support seek, or if this input stream has been closed by invoking itsclose()
method, or an I/O error occurs.
-
available
Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream. The next invocation might be the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.This method returns the number of bytes remaining to be read in the buffer (
count - pos
), possibly refilling the buffer if it was empty at the time of this call. Specifically, it does _not_ try to return the total remaining bytes in the file.- Overrides:
available
in classFilterInputStream
- Returns:
- an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking.
- Throws:
IOException
- if this input stream has been closed by invoking itsclose()
method, or an I/O error occurs.
-
mark
public void mark(int readlimit) See the general contract of themark
method ofInputStream
.- Overrides:
mark
in classFilterInputStream
- Parameters:
readlimit
- the maximum limit of bytes that can be read before the mark position becomes invalid.- See Also:
-
reset
See the general contract of thereset
method ofInputStream
.If
markpos
is-1
(no mark has been set or the mark has been invalidated), anIOException
is thrown. Otherwise,pos
is set equal tomarkpos
.- Overrides:
reset
in classFilterInputStream
- Throws:
IOException
- if this stream has not been marked or, if the mark has been invalidated, or the stream has been closed by invoking itsclose()
method, or an I/O error occurs.- See Also:
-
markSupported
public boolean markSupported()Tests if this input stream supports themark
andreset
methods. ThemarkSupported
method ofNonshareableCountingBufferedDataInputStream
always returnsfalse
.- Overrides:
markSupported
in classFilterInputStream
- Returns:
- a
boolean
indicating if this stream type supports themark
andreset
methods. - See Also:
-
close
Closes this input stream and releases any system resources associated with the stream. Once the stream has been closed, further read(), available(), reset(), or skip() invocations will throw an IOException. Closing a previously closed stream has no effect.- Specified by:
close
in interfaceAutoCloseable
- Specified by:
close
in interfaceCloseable
- Overrides:
close
in classFilterInputStream
- Throws:
IOException
- if an I/O error occurs.
-
read
Reads some number of bytes from the contained input stream and stores them into the buffer arrayb
. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown.If
b
is null, aNullPointerException
is thrown. If the length ofb
is zero, then no bytes are read and0
is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value-1
is returned; otherwise, at least one byte is read and stored intob
.The first byte read is stored into element
b[0]
, the next one intob[1]
, and so on. The number of bytes read is, at most, equal to the length ofb
. Letk
be the number of bytes actually read; these bytes will be stored in elementsb[0]
throughb[k-1]
, leaving elementsb[k]
throughb[b.length-1]
unaffected.The
read(b)
method has the same effect as:read(b, 0, b.length)
- Overrides:
read
in classFilterInputStream
- Parameters:
b
- the buffer into which the data is read.- Returns:
- the total number of bytes read into the buffer, or
-1
if there is no more data because the end of the stream has been reached. - Throws:
IOException
- if the first byte cannot be read for any reason other than end of file, the stream has been closed and the underlying input stream does not support reading after close, or another I/O error occurs.- See Also:
-
readFully
See the general contract of thereadFully
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readFully
in interfaceDataInput
- Parameters:
b
- the buffer into which the data is read.- Throws:
EOFException
- if this input stream reaches the end before reading all the bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readFully
See the general contract of thereadFully
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readFully
in interfaceDataInput
- Parameters:
b
- the buffer into which the data is read.off
- the start offset of the data.len
- the number of bytes to read.- Throws:
EOFException
- if this input stream reaches the end before reading all the bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
skipBytes
See the general contract of theskipBytes
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
skipBytes
in interfaceDataInput
- Parameters:
n
- the number of bytes to be skipped.- Returns:
- the actual number of bytes skipped.
- Throws:
IOException
- if the contained input stream does not support seek, or the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readBoolean
See the general contract of thereadBoolean
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readBoolean
in interfaceDataInput
- Returns:
- the
boolean
value read. - Throws:
EOFException
- if this input stream has reached the end.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readByte
See the general contract of thereadByte
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readByte
in interfaceDataInput
- Returns:
- the next byte of this input stream as a signed 8-bit
byte
. - Throws:
EOFException
- if this input stream has reached the end.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readUnsignedByte
See the general contract of thereadUnsignedByte
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readUnsignedByte
in interfaceDataInput
- Returns:
- the next byte of this input stream, interpreted as an unsigned 8-bit number.
- Throws:
EOFException
- if this input stream has reached the end.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readShort
See the general contract of thereadShort
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readShort
in interfaceDataInput
- Returns:
- the next two bytes of this input stream, interpreted as a signed 16-bit number.
- Throws:
EOFException
- if this input stream reaches the end before reading two bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readUnsignedShort
See the general contract of thereadUnsignedShort
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readUnsignedShort
in interfaceDataInput
- Returns:
- the next two bytes of this input stream, interpreted as an unsigned 16-bit integer.
- Throws:
EOFException
- if this input stream reaches the end before reading two bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readChar
See the general contract of thereadChar
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readChar
in interfaceDataInput
- Returns:
- the next two bytes of this input stream, interpreted as a
char
. - Throws:
EOFException
- if this input stream reaches the end before reading two bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readInt
See the general contract of thereadInt
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readInt
in interfaceDataInput
- Returns:
- the next four bytes of this input stream, interpreted as an
int
. - Throws:
EOFException
- if this input stream reaches the end before reading four bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readLong
See the general contract of thereadLong
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readLong
in interfaceDataInput
- Returns:
- the next eight bytes of this input stream, interpreted as a
long
. - Throws:
EOFException
- if this input stream reaches the end before reading eight bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
-
readFloat
See the general contract of thereadFloat
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readFloat
in interfaceDataInput
- Returns:
- the next four bytes of this input stream, interpreted as a
float
. - Throws:
EOFException
- if this input stream reaches the end before reading four bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.- See Also:
-
readDouble
See the general contract of thereadDouble
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readDouble
in interfaceDataInput
- Returns:
- the next eight bytes of this input stream, interpreted as a
double
. - Throws:
EOFException
- if this input stream reaches the end before reading eight bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.- See Also:
-
readLine
See the general contract of thereadLine
method ofDataInput
.Bytes for this operation are read from the contained input stream. Note that this method only supports extended 8-bit ASCII; it does not support UTF-8 or other locale-specific character sets.
- Specified by:
readLine
in interfaceDataInput
- Returns:
- the next line of text from this input stream.
- Throws:
IOException
- if an I/O error occurs.
-
readUTF
See the general contract of thereadUTF
method ofDataInput
.Bytes for this operation are read from the contained input stream.
- Specified by:
readUTF
in interfaceDataInput
- Returns:
- a Unicode string.
- Throws:
EOFException
- if this input stream reaches the end before reading all the bytes.IOException
- the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.UTFDataFormatException
- if the bytes do not represent a valid modified UTF-8 encoding of a string.
-
getByteCount
public long getByteCount()Get the number of bytes read (or skipped) by this stream.- Returns:
- long byte count
-